Merlin Powerlift Installationsanleitung PDF herunterladen (Seite 27)

installer selectable features descriptions - column one

accessory output auto activation - off/arm/disarm/both

NNOOTTEE::

The accessory output will not auto-activate if programmed to latched setting.

Refer to program Note #4.

Off: The accessory output will not automatically activate when the alarm is either

armed or disarmed. It will only activate by pressing the button on the

remote control.

Arm: The accessory output will auto-activate when the system is armed.

Disarm: The accessory output will auto-activate when the system is disarmed.

Both: The accessory output will auto-activate when the system is armed and

disarmed.

accessory output programming - P1/P2/timed/latched/latched (ignition

reset)/Remote Start

The auxiliary accessory output wire (H3 RED/WHITE) can be programmed for sever-

al different types of outputs.

P1 0.8 seconds: The pulsed output is disabled with the ignition on or the alarm

armed, but will remain on for as long as the button is pressed.

P2 0.8 seconds: The pulsed output will operate any time and remain on for as

long as the button is pressed.

Timed: The output duration is 10 seconds as default but can be programmed for

up to 255 seconds.

Latched: The output is controlled by pressing the button(s) controlling the accessory.

It will remain on until you press the button again.

First

Press

Then

Press

Normally Closed/

Normally Open

trigger input H1/11

One-time

Valet

On/Off

Accessory output

timer duration

10-seconds

Horn output

pulsed/latched

Acc. output

auto-activate

off/arm/disarm/both

Acc. output P1/

P2/timed/latch/

latch reset

w/ignition/RS)

Tilt Adjustment

1 degree

/3 degrees

NOT USED

Autommobilization

On/Off

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 36 37

Kommentare zu diesen Handbüchern

Keine Kommentare

Merlin Powerlift Installationsanleitung Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Garagentor-Öffner Merlin Powerlift